Use this article if your J40 is leaving more water on the floor than usual, leaving wet streaks, or the dirty water tank stays empty after scrubbing.
The most common cause of extra water on the floor is a clean water tank that is filled to 100%. Fill the clean water tank to about 75% full, then run a short scrub and check the floor.
Debris or a worn rubber strip on the squeegee stops it from collecting water. Follow BIB J40: Clean the Squeegee. If the rubber is torn or worn down, follow BIB J40: Replace the Squeegee Rubber.
A clogged filter reduces suction. Follow BIB J40: Clean the Roller Mop Filter Box and BIB J40: Clean the Dirty Water Tank.
Call Tech Support at +1 (724) 799-8157 or submit a ticket. Include your robot model, its serial number, what you have already tried, and a photo or short video of the problem. That lets us help you faster.