BIB J40: Clean the Squeegee
How to Clean the Squeegee
Steps
- Pull up on the knob.
- Pull the squeegee to the right and then off.
- Flip the squeegee upside down.
- Wipe the squeegee clean.
- To reattach...
- Put the squeegee top back in the grooves.
- Pull up on the knob.
- Push the squeegee to the left until you hear it click in place
- For a deeper clean...
- Unscrew the screw around the pipe.
- Pull the pipe out.
- Rinse the entire squeegee with water.
Frequency
Clean the squeegee every 3 days.
Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.
Related Articles
BIB J40: Start an Automatic Cleaning Task
How to Start an Automatic Cleaning Task Instructional Video Link Once on the correct floor and initialized, click "Auto Clean" on the robot's main screen. Select the task/tasks you wish to run. Make sure the Manual Mode button is not pushed in. Click ...
BIB J40: Schedule a Cleaning Task
Instructional Video Link How To Schedule a Cleaning Task Click on "Auto Clean." Click on the arrow next to the cleaning task you want to create a schedule for. Click on the pencil icon on the top right of the screen to edit the task. A pop up will ...
BIB J40: Replace the Squeegee Rubber
How to Replace the Squeegee Rubber Instructional Video Link Steps Descend the squeegee. Remove the squeegee cover. Loosen the four knobs and take away the two limited wheels. Take the squeegee out. Unlock the hook to take away the metal plate. Remove ...
BIB J40: Clean the Roller Mop Filter Box
How to Clean the Roller Mop Filter Box Instructional Video Link Steps Remove lower side panels from the robot. Pull out the pipe from the bottom right of the robot. Loosen the screw on the bottom left of the robot located behind the roller mop. ...
BIB J40: Clean the Roller Brush and Waste Bin
How to Clean the Roller Brush and Waste Bin Instructional Video Link Steps Remove the lower right side panel of the robot. Remove the two screws holding the roller brush module on. Pull out the roller brush module. Pull the waste bin out of the ...