BIB J40: Clean the Dirty Water Tank
How to Clean the Dirty Water Tank
Steps
- Remove the dirty water tank from the inside of the robot.
- Open the cover of the tank and remove any excess waste water.
- Fill the tank 1/2 way with clean water.
- Close the cove rand shake the tank.
- Repeat 2 times.
- Put the dirty water tank back into place.
Frequency
Clean the tank every 3 days.
Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.
Related Articles
BIB J40: Clean the Dust Bin and HEPA Filter
How to Clean the Dust Bin and HEPA Filter Instructional Video Link Steps Open the lid of the robot. Open the lid of the dirty water tank. Remove the vacuum dust bin. Empty the dust bin contents into the trash. Remove the 2 part HEPA filter from the ...
BIB J40: Clean the Roller Mop Filter Box
How to Clean the Roller Mop Filter Box Instructional Video Link Steps Remove lower side panels from the robot. Pull out the pipe from the bottom right of the robot. Loosen the screw on the bottom left of the robot located behind the roller mop. ...
BIB J40: Clean the Roller Brush and Waste Bin
How to Clean the Roller Brush and Waste Bin Instructional Video Link Steps Remove the lower right side panel of the robot. Remove the two screws holding the roller brush module on. Pull out the roller brush module. Pull the waste bin out of the ...
BIB J40: Clean the Squeegee
How to Clean the Squeegee Instructional Video Link Steps Pull up on the knob. Pull the squeegee to the right and then off. Flip the squeegee upside down. Wipe the squeegee clean. To reattach... Put the squeegee top back in the grooves. Pull up on the ...
BIB J40: Top Icons Overview
Top Icons on Main Robot Screen From Left to Right Instructional Video Link This symbol shows whether the robot is online or not. If the robot is online and able to be accessed remotely, it will show a checkmark inside the rectangle. If it is offline, ...