BIB J40: Robot Won't Dock or Charge

BIB J40: Robot Won't Dock or Charge

Use this article if your J40 won't go back to its charging station, won't connect to the charger, or shows a message asking you to move the robot to a drivable location.

Step 1: Check the charging station

The charging station must sit flat on a hard, level floor, against a wall, and must not be moved after the robot is mapped. If the station sits on a carpet edge or is tilted, the robot may not line up with the charging contacts. Make sure the station's power plug is connected and its status light is on.

Step 2: Clear the path

Remove anything on the floor between the robot and the charging station, and keep the area in front of the station clear.

Step 3: If the screen says to move the robot to a drivable location

The robot has lost track of where it is or is stuck. Put the robot in manual mode, push it into an open area near the charging station, then return it to automatic mode. See BIB J40: Manual Mode.

Step 4: Check the emergency stop and battery switch

If the emergency stop button is pressed in, the robot will not move. Twist the button to release it. Also check that the battery switch is turned on.

Step 5: Charge it manually if needed

If the robot still won't dock, you can charge it with the manual charger using the manual charging port on the robot, then contact us.

Scheduled cleanings not running?

If the robot is not charged, scheduled tasks will not start. Once it is charging again, check your schedule using BIB J40: Schedule a Cleaning Task.

Still not working?

Call Tech Support at +1 (724) 799-8157 or submit a ticket. Include your robot model, its serial number, what you have already tried, and a photo or short video of the problem. That lets us help you faster.