BIB J40 Top Icons Overview

BIB J40: Top Icons Overview

Top Icons on Main Robot Screen From Left to Right


This symbol shows whether the robot is online or not. If the robot is online and able to be accessed remotely, it will show a checkmark inside the rectangle. If it is offline, an "x" will be inside the rectangle. If the robot is offline, tech support will not be able to access the robot to help with troubleshooting or access any task data.

This symbol shows whether or not the robot is connected to WIFI. An "!" in front of this symbol means it is NOT connected. The robot needs to be connected to WIFI for remote access to work and for task logs to upload into the cloud.


This symbol shows whether or not the robot is using Data from a SIM card. 

This symbol shows whether or not the robot knows its location. If it does, there will be a checkmark inside the circle. If it does not, there will be an "x" inside the circle. The robot cannot perform tasks if it does not know its location. Initialize the robot if there is an "x" in this symbol. 

This symbol shows the level of dirty water inside the robot.

This symbol shows the level of clean water inside the robot.

This symbol shoes the level of battery the robot has.


This symbol is the current time. 

Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.

    • Related Articles

    • BIB J40: Bottom Icons Overview

      Instructional Video Link Restart Button Click the grey rectangle on the left side of the robot's screen. Click the "Restart" button to restart the robot. Consumables Button The buttons in this section can be used to lower or raise the squeegee/roller ...

    • BIB J40: System Settings Overview

      What Can Be Done in System Settings? Instructional Video Link Volume level changes Charging threshold changes Cleaning part speed changes Only change if instructed from support Software updates WIFI connections Still need help? Click "Submit a ...

    • BIB J40: Manual Mode

      How to Switch the Robot to Manual Mode Instructional Video Link Click and hold in the "M/A" button on the top of the robot until the light turns on around the button. Pull up on the black handle. Pull back the red handle locks on both sides of the ...

    • BIB J40: Clean the Squeegee

      How to Clean the Squeegee Instructional Video Link Steps Pull up on the knob. Pull the squeegee to the right and then off. Flip the squeegee upside down. Wipe the squeegee clean. To reattach... Put the squeegee top back in the grooves. Pull up on the ...

    • BIB J40: Start an Automatic Cleaning Task

      How to Start an Automatic Cleaning Task Instructional Video Link Once on the correct floor and initialized, click "Auto Clean" on the robot's main screen. Select the task/tasks you wish to run. Make sure the Manual Mode button is not pushed in. Click ...