BIB J40: Start an Automatic Cleaning Task
How to Start an Automatic Cleaning Task
- Once on the correct floor and initialized, click "Auto Clean" on the robot's main screen.
- Select the task/tasks you wish to run.
- Make sure the Manual Mode button is not pushed in.
- Click "Start Task" in the top right corner.
- Confirm the task choice by pressing "OK."
Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.
Related Articles
BIB J40: Schedule a Cleaning Task
Instructional Video Link How To Schedule a Cleaning Task Click on "Auto Clean." Click on the arrow next to the cleaning task you want to create a schedule for. Click on the pencil icon on the top right of the screen to edit the task. A pop up will ...
AutoXing Robot Models: Scheduled Tasks
What are Scheduled Tasks? The robot can be scheduled to perform certain tasks at different times daily. Examples/Ideas... 1. If the robot is needed in the kitchen at 9am, it can be scheduled to leave it's charger and go to the kitchen standby point ...
BIB J40: Clean the Squeegee
How to Clean the Squeegee Instructional Video Link Steps Pull up on the knob. Pull the squeegee to the right and then off. Flip the squeegee upside down. Wipe the squeegee clean. To reattach... Put the squeegee top back in the grooves. Pull up on the ...
BIB J40: Manual Mode
How to Switch the Robot to Manual Mode Instructional Video Link Click and hold in the "M/A" button on the top of the robot until the light turns on around the button. Pull up on the black handle. Pull back the red handle locks on both sides of the ...
BIB J40: Bottom Icons Overview
Instructional Video Link Restart Button Click the grey rectangle on the left side of the robot's screen. Click the "Restart" button to restart the robot. Consumables Button The buttons in this section can be used to lower or raise the squeegee/roller ...