BIB J40 How to Replace the Roller Brush

BIB J40: Replace the Roller Brush

How to Replace the Roller Brush

Steps

  1. Remove the lower right side panel of the robot.
  2. Remove the two screws holding the roller brush module on.
  3. Pull out the roller brush module.
  4. Take out the old roller brush and remove the fixed block.
  5. Install the fixed block on the new roller brush.
  6. Keep tension on the fixed block while the roller brush module is put back in.
  7. Install back the two screws.
  8. Reattach the side panel.
Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.

    • Related Articles

    • BIB J40: Clean the Roller Brush and Waste Bin

      How to Clean the Roller Brush and Waste Bin Instructional Video Link Steps Remove the lower right side panel of the robot. Remove the two screws holding the roller brush module on. Pull out the roller brush module. Pull the waste bin out of the ...

    • BIB J40: Replace the Side Brushes

      How to Replace the Side Brushes Instructional Video Link Steps Press the side brush down to remove it. Push the new side brush up into the empty slot. Rotate the side brush to check if the install went well. Repeat these steps on the 2nd side brush. ...

    • BIB J40: Clean the Roller Mop Filter Box

      How to Clean the Roller Mop Filter Box Instructional Video Link Steps Remove lower side panels from the robot. Pull out the pipe from the bottom right of the robot. Loosen the screw on the bottom left of the robot located behind the roller mop. ...

    • BIB J40: Replace the Squeegee Rubber

      How to Replace the Squeegee Rubber Instructional Video Link Steps Descend the squeegee. Remove the squeegee cover. Loosen the four knobs and take away the two limited wheels. Take the squeegee out. Unlock the hook to take away the metal plate. Remove ...

    • BIB J40: Bottom Icons Overview

      Instructional Video Link Restart Button Click the grey rectangle on the left side of the robot's screen. Click the "Restart" button to restart the robot. Consumables Button The buttons in this section can be used to lower or raise the squeegee/roller ...