BIB J40 How to Clean the Dust Bin and HEPA Filter

BIB J40: Clean the Dust Bin and HEPA Filter

How to Clean the Dust Bin and HEPA Filter

Steps

  1. Open the lid of the robot.
  2. Open the lid of the dirty water tank.
  3. Remove the vacuum dust bin.
  4. Empty the dust bin contents into the trash.
  5. Remove the 2 part HEPA filter from the lid of the dust bin.
  6. Clean off the HEPA filter.
  7. Reinstall both pieces.
  8. Close the dust bin lid and return it to its proper place. 

Frequency

Clean these parts multiple times a day when first using the robot then move to once a day. 

Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.

    • Related Articles

    • BIB J40: Clean the Roller Mop Filter Box

      How to Clean the Roller Mop Filter Box Instructional Video Link Steps Remove lower side panels from the robot. Pull out the pipe from the bottom right of the robot. Loosen the screw on the bottom left of the robot located behind the roller mop. ...

    • BIB J40: Clean the Roller Brush and Waste Bin

      How to Clean the Roller Brush and Waste Bin Instructional Video Link Steps Remove the lower right side panel of the robot. Remove the two screws holding the roller brush module on. Pull out the roller brush module. Pull the waste bin out of the ...

    • BIB J40: Clean the Squeegee

      How to Clean the Squeegee Instructional Video Link Steps Pull up on the knob. Pull the squeegee to the right and then off. Flip the squeegee upside down. Wipe the squeegee clean. To reattach... Put the squeegee top back in the grooves. Pull up on the ...

    • BIB J40: Clean the Dirty Water Tank

      How to Clean the Dirty Water Tank Instructional Video Link Steps Remove the dirty water tank from the inside of the robot. Open the cover of the tank and remove any excess waste water. Fill the tank 1/2 way with clean water. Close the cove rand shake ...

    • BIB J40: Manual Mode

      How to Switch the Robot to Manual Mode Instructional Video Link Click and hold in the "M/A" button on the top of the robot until the light turns on around the button. Pull up on the black handle. Pull back the red handle locks on both sides of the ...