BIB J40 Bottom Icons Overview

BIB J40: Bottom Icons Overview

Restart Button

  1. Click the grey rectangle on the left side of the robot's screen.
  2. Click the "Restart" button to restart the robot.

Consumables Button

  1. The buttons in this section can be used to lower or raise the squeegee/roller mop for part replacement or cleaning.

Recharge Button

  1. Click this button to send the robot back to the charger.
    1. This will only work on the floor the charger is located on until elevator integration is complete.

Message Box Button

  1. Click this button to see communications from the robot including system error codes.

Map Settings Button

  1. Click this button to switch maps between floors until elevator integration is complete.

Initialization Button 

  1. Click this button to help the robot find it's current location. 
    1.  It is recommended to perform this task on the "Manual Positioning" setting. 

System Settings Button

  1. Click this button to access the robot's setting changes. 
    1. Please reference the "System Settings Overview" article for more details.

More Button

  1. Click on "Task Report" once you have clicked the "More" button. 
    1. This section will tell you how the robot has completed it's tasks.
      1. Ex. How long the task took, what percentage was completed. start/end time, etc.

Still need help? Click "Submit a Ticket" at the bottom of the page.
You can also call our tech support office at 724.799.8157.
.

    • Related Articles

    • BIB J40: Top Icons Overview

      Top Icons on Main Robot Screen From Left to Right Instructional Video Link This symbol shows whether the robot is online or not. If the robot is online and able to be accessed remotely, it will show a checkmark inside the rectangle. If it is offline, ...

    • BIB J40: System Settings Overview

      What Can Be Done in System Settings? Instructional Video Link Volume level changes Charging threshold changes Cleaning part speed changes Only change if instructed from support Software updates WIFI connections Still need help? Click "Submit a ...

    • BIB J40: Manual Mode

      How to Switch the Robot to Manual Mode Instructional Video Link Click and hold in the "M/A" button on the top of the robot until the light turns on around the button. Pull up on the black handle. Pull back the red handle locks on both sides of the ...

    • AutoXing Robot Models: Adjusting Delivery Stop Time

      Delivery Stop Time The delivery stop time or "countdown time" is how long the robot will stay at a delivery before it departs for either the next delivery or standby point. If the delivery is not "finished" (someone does not click on the button on ...

    • AutoXing Robot Models: Delivery Music Changes and Uploads

      Changing the Delivery Music This setting change will adjust what sound the robot plays as it travels from task to task. There are preloaded sounds to choose from or a new MP3 file can be uploaded and used. How to Upload a New MP3 File 1. Click the ...